Stacking Systems

Shingle Delivery Conveyor

  • Direct drive (no gearboxes)
  • Segmented modular design for gradual acceleration resulting in fewer stacker jambs
  • V-Grooved belt rolls with Twin A, poly belting
  • UHMW belt stabilizers
  • Independently mounted ceramic lined side guides for greater adjustability
Reichel & Drews Stacking Systems

Reichel & Drews 2-wide Stacking Systems

Reichel & Drews 4-wide Stacking System

Reichel & Drews 4-wide Stacking System

Diverter

Reichel & Drews Stacking Systems Diverter

Reichel & Drews Stacking Systems Diverter

Reichel & Drews Stacking Systems Diverter

Reichel & Drews Stacking Systems Diverter

  • Servo Driven
  • Light weight (low inertia)
  • Responsive
  • Low Maintenance

Drop Conveyor 

Reichel & Drews Stacking Systems Drop Conveyor

Reichel & Drews Stacking Systems Drop Conveyor

  • V-backed rough top belting
  • Belts equipped with individual tensioners that are adjustable from outside frame & guards via right angle linear actuator.
  • Reversible center drive

Stacker Box

  • Servo Driven
  • Frame provides easy access to components for quick replacement
  • Starwheels and drop plates are coupled directly to servo reducers
  • No realignment necessary when replacing starwheels due to 3-piece coupling design
  • Operational flexibility even with unbalanced stacks allowing square drops
  • Production speeds of up to 700 fpm (213 mpm) into a single box depending on shingle design
Reichel & Drews Stacking Systems

Reichel & Drews Stacking Systems

Reichel & Drews Stacking Systems

Reichel & Drews Stacking Systems

Accumulation Conveyors 

Reichel & Drews Stacking Systems Conveyor

Reichel & Drews Stacking Systems Conveyor

  • Belt driven live rollers
  • 2-1/2” (64 mm) dia., 11 ga. rollers
  • High speed sealed bearings
  • Air operated zones
  • Typical zone length of 42” (1066 mm)
  • 14” wide (355 mm), 3 ply black PVC-120 belting
  • Brake section at exit end

Timing Feed Conveyors

  • Servo driven entry section
  • AC vector driven exit section
  • Twin A, poly belting
  • UHMW slide supports provide full bundle support

Hi-Lug Conveyor

  • Modular frame
  • UHMW return rail for lugs
  • Slider beds adjustable on two axis
  • Pusher lugs feature easily replaceable Crodon faces and bushed attachment holes with larger attachment bolts for easy change
  • Slide plates at the entry point are ceramic for consistent and proper friction from a stationary position to speed from the pusher lug
  • Slide plates between the entry and exit positions are Crodon for long service life
Reichel & Drews Stacking Systems Hi Lug

Reichel & Drews Stacking Systems Hi Lug

Reichel & Drews Stacking Systems Hi Lug

Reichel & Drews Stacking Systems Hi Lug

Advanced Stacking System Jam Detection

  • Cutter jam is detected with photo eyes at the exit of cutter
  • Diverter jam causes laminator to stop
  • Stacker jam causes laminator to slow down and shingles to be redirected to operational stacker
  • Hi-Lug jam causes the laminator to slow down until zoned timing conveyors are filled

Drives & Controls

Reichel & Drews Stacking Systems Drives Controls

Reichel & Drews Stacking Systems Drives Controls

  • Allen Bradley ControlLogix PLC with Ethernet and Profibus cards or Siemens S7 PLC with Ethernet and Profibus cards
  • Allen Bradley or Siemens servo motors and amplifiers
  • Profibus for servo drive communication
  • Remote I/O with Ethernet communication
  • Panelview Plus 1000 or Siemens MP 277, 10” color touchscreen for main operator interface
  • Air-conditioned control panel
  • Completely wired and factory tested

Please Contact Us to learn more about our Stacking Systems.